Skip to main content

Holiday Light Safety Tips


The holiday season couldn’t be complete without holiday lights, but they should be used with caution. Holiday lights pose a risk of fire and other accidents if not used safely. 
Here are some key holiday lights safety tips every homeowner should following "decking the halls".

Christmas Lights
  • Only Christmas tree lights that are rated for indoor use and tested for safety should be used. The lights must have the label of an independent testing laboratory, such as Underwriters Laboratories of Canada (ULC).
  • Electric lights should never be put on metallic Christmas trees to avoid the risk of electric shock.
  • Each set of lights should be checked for worn or broken cords, broken or cracked sockets, and loose bulb connections. Damaged lights must be replaced.
  • No more than three standard-size sets of lights should be connected into an extension cord. Instead of overloading electrical outlets or extension cords, lights should be plugged into different circuits around the home.
  • Color changing spotlights must not be fastened onto metallic trees. They should be used above or beside the tree to prevent tree branches from becoming charged with electricity from faulty lights.
  • All Christmas lights and decorations have to be turned off when going to bed or leaving home.
  • To keep pets safe, the electric cords and tree lights should be protected so that pets can’t chew them and get shocked.

Outdoor Lights
  • Outdoor lights must be rated for exterior use by an independent testing laboratory. Exterior lights and extension cords used outdoors need to be weather-resistant.
  • Exterior lights should be fastened securely to trees, house, walls or other firm support to protect from wind damage. However, light strings should not be attached with nails or staples, as these can cut through the wire insulation and start a fire. Only UL-approved hangers should be used.
  • Outdoor lights should be taken down within 90 days to prevent hazards from weather damage or critters chewing on them.
  • The lights need to be stored safely after taking them down. Tangled lights can lead to damaged cords and broken sockets. They’re also a pain to untangle! The strings can be wrapped around a piece of cardboard, covered in paper or fabric, and then stored in a sturdy container until next year.

 Candles
  • Real candles should never be used to decorate a tree. Battery-operated, flame less LED candles can be used instead.
  • Only non-flammable candle holders must be used.
  • Candles have to be placed where they can’t be knocked down or blown over.
  • Candles should be kept away from any flammable objects like decorations or drapes.
  • It’s never a good idea to burn candles near trees or greenery.
  • Burning candles must always be kept within sight.
  • All candles should be extinguished before going to bed, leaving the room or leaving the home.


Like and Follow us on Facebook, Twitter, and Instagram for more!

INSPECT IT ALL SERVICES      www.inspectitall.ca
Labels:

Comments

Post a Comment

Popular posts from this blog

Clearing the Air: Indoor Air Quality Concerns After Water and Fire Damage

  When a home or business experiences water or fire damage, the immediate focus is often on the visible destruction. Charred walls, soaked carpets, and ruined possessions dominate our attention. However, a significant but less obvious concern is the impact these events have on indoor air quality (IAQ). Addressing these concerns is crucial for health, safety, and a successful restoration process. The Unseen Dangers: Indoor Air Contaminants 1. Mold and Mildew Water damage, whether from floods, burst pipes, or firefighting efforts, creates a perfect breeding ground for mold and mildew. These fungi thrive in damp, warm environments and can start growing within 24-48 hours after water exposure. Mold spores are airborne and can cause respiratory issues, allergic reactions, and other health problems, especially for those with preexisting conditions like asthma. 2. Smoke and Soot Fire damage leaves behind more than just ashes. Smoke and soot particles can infiltrate your HVAC system, carp...
Post a Comment
Read more

Common places for moisture - in the Attic, Basement and Crawl space

Moisture is a pervasive problem that can wreak havoc on your home if not addressed promptly. It can lead to structural damage, mold growth, and a host of health issues. Three of the most common areas where moisture problems often arise are the attic, basement, and crawl space. Understanding the causes and solutions for moisture in these areas can help you maintain a healthy and safe home environment. The Attic Causes of Moisture in the Attic Roof Leaks: One of the most common causes of moisture in the attic is a leaky roof. Damaged shingles, flashing, or vents can allow water to seep in during rainstorms. Poor Ventilation: Attics require proper ventilation to expel warm, moist air. Without adequate ventilation, moisture can accumulate, especially in colder months when warm air from the living space rises. Improper Insulation: Insufficient or improperly installed insulation can lead to condensation. When warm air from the house meets the cold surfaces of the attic, it can create mois...
Post a Comment
Read more

Is there a difference between Mold and Mildew?

With water damage claims on the rise, we hear a lot of talk these days about the dangers of mold.  Within 24 to 48 hours of water damage, mildew and mold can start growing on wood products, tiles, drywall, carpets, fabrics and other organic materials.  Even worse, it will continue to grow until steps are taken to eliminate the source of moisture, and effectively deal with the problem.  So what is the difference between mold and mildew?  Plain and simple, mildew and mold are both fungi. Fungi can live in many different types of environments such as in soil, on vegetation, and on surfaces exposed to moist conditions like a wall or ceiling after flood damage. Fungi reproduce by spores and can spread quickly. What is Mildew?  Mildew is mold in its early stage and often the term is used interchangeably with the word mold. That whitish-gray, powdery substance sometimes seen on the leaves of a plant is mildew. Mildew is a surface fungi that grows on organic material li...
Post a Comment
Read more